$53.27
BuyMBS.com
About
Product Image

Loctite PL 500 Landscape Block & Paver Adhesive (Carton of 12) 10oz. Fiber

$53.27
BuyMBS.com
Visit site
About
Preparation: The temperature of the adhesive, the surfaces and the working area must be between 0 degreesF (-18 degreesC) and 100 degreesF (38 degreesC). For smooth, fast, easy application during cold weather, store adhesive at room temperature (70 degrees ± 5 degreesF) 24 hours prior to use. Ensure surfaces to be bonded are clean, dry, structurally sound and free of dust, grease, oil or other contaminants. To increase adhesion, sand glossy surfa…
Preparation: The temperature of the adhesive, the surfaces and the working area must be between 0 degreesF (-18 degreesC) and 100 degreesF (38 degreesC). For smooth, fast, easy application during cold weather, store adhesive at room temperature (70 degrees ± 5 degreesF) 24 hours prior to use. Ensure surfaces to be bonded are clean, dry, structurally sound and free of dust, grease, oil or other contaminants. To increase adhesion, sand glossy surfaces to a dull finish. Pre-fit all materials prior to applying product. Cut off tip of cartridge at 45 degrees angle to desired bead size. For exterior applications, the recommended bead size is 3/8' (9.5 mm). Puncture seal inside of nozzle.Application Apply a continuous zigzag bead to one surface to be bonded. Apply the adhesive at a rate so that the materials can be positioned and fastened within 10 minutes. All projects may require support until adhesive has cured. It is recommended that all foot traffic stay off of paver stones or retaining caps for at least 24 to 48 hours after installation and heavy traffic for approximately 4 to 5 days. For Landscape Blocks: When installing the cap onto the final course of landscape blocks, apply a 6.3 mm (¼') bead approximately 5 cm (2') in from the front and 5 cm (2') in from the back of the cap to be installed. For Concrete Paving Stones: Apply an 'S' shaped bead approximately 6.3 mm (¼') to 9.5 mm (3/8') in diameter to the back of the stone to be installed. If using old concrete, clean with a 20% hydrochloric acid solution. Clean Up Clean tools and uncured adhesive residue immediately with acetone or mineral spirits in a well-ventilated area to the outdoors. Cured adhesive may be carefully cut away with a sharp-edged tool.
Something went wrong. Please try again later.
Share this product
Loctite PL 500 Landscape Block & Paver Adhesive (Carton of 12) 10oz. Fiber
This product ad may change over time
Share ProductShare
Product Image
$53.27
Visit site
About
price trend
Tracking price
We added this to your collection and will notify you if the price dropsView collection
Price tracking canceled
We removed this from your collectionView collection
Something went wrong. Please try again later.
Track price
Receive email and browser notifications if the price drops
Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Feedback